Fix a Leak 1 QT
 
1.Make sure there are no objects in the tub that could get sucked into the plumbing (toys/scumbug/large leaves/debris/etc.)
2.Remove your filter(s) and set aside. The Fix-Leak will clog the filters immediately if left in the spa.
3.Turn jets on high speed – make sure ALL jets are open and pushing water out, including neck jets and water features, and diverter valves are in their open/middle positions.
4.Dump an entire 32oz Bottle of Fix-A-Leak into the skimmer/filter area of the hot tub
5.For 1 full week, turn the jets on at least once daily and twist the diverter valves around to ensure the Fix-A-Leak liquid is flowing through all plumbing
6.Monitor water level and top off if necessary – ideally the Fix-A-Leak will have stopped your leak. If tub continues leaking it may be an issue the treatment can’t fix
7.At the end of 1 full week turn tub power off, drain water fully and use shop vacuum to suck out remaining water/fix a leak treatment from bottom of tub
8.After 48 hours, refill the tub, put filters back in or replace with New filters, turn power back on, and run jets.
9.Monitor water level to see if treatment worked
10.If water level holds steady, the treatment worked. Yay! If water continues to drop, Treatment may not have been sufficient for that type of leak. You can try the process again with a second bottle if necessary.

The product is not guaranteed to work but it is effective about 75% of the time.
Contact our service professionals at 425-825-5674 to share results/discuss further options.